знания и навыки

учебная и научная литература

технические науки

научно-популярная литература

зарубежная образовательная литература

The EPA investigation of a 1994 chemical plant tragedy concluded that «the explosion resulted from a lack of written safe operating procedures…» While good written procedures can't guarantee zero accidents, they can reduce the number of accidents caused by human error. This new book shows how to remedy this problem through selecting and implementing actions that promote safe, efficient operations and maintenance, improve quality, continuity, profitability and cost control, build upon and record process experience, and promote the concept that operating and maintenance procedures are vital plant components. It includes practical samples of procedure formats, checklists and many references.

юмористическая фантастика

Guidelines for Writing Effective Operating and Maintenance Procedures

Prevention, preparedness, response and recovery–the key components of emergency planning–form the major sections of this work. The book first describes PSM (Process Safety Management) as the key to prevention, then goes on to consider the main features of a preparedness program, including recognizing credible incidents, planning practical strategy to deal with these incidents, selecting necessary physical support systems and equipment, and developing a complete emergency response plan. The Response section presents the functions implemented during an actual emergency and concludes with a section on managing cleanup and restoration of operations. The many tables and figures include Sample Incident Command System Plans for both large and small organizations, OSHA and EPA regulations affecting planning, sample Fire Emergency Action Levels, HAZMAT Responder Levels, and OSHA Emergency Training Requirements.

детские приключения

мистика

Guidelines for Technical Planning for On-Site Emergencies

This book provides designers and operators of chemical process facilities with a general philosophy and approach to safe automation, including independent layers of safety. An expanded edition, this book includes a revision of original concepts as well as chapters that address new topics such as use of wireless automation and Safety Instrumented Systems. This book also provides an extensive bibliography to related publications and topic-specific information.

любовные романы

ужасы / мистика

фэнтези

эротика и секс

современные любовные романы

эротические романы

современная русская литература

русское фэнтези

Guidelines for Safe Automation of Chemical Processes

This guide provides an overview of methods for estimating the characteristics of vapor cloud explosions, flash fires, and boiling-liquid-expanding-vapor explosions (BLEVEs) for practicing engineers. It has been updated to include advanced modeling technology, especially with respect to vapor cloud modeling and the use of computational fluid dynamics. The text also reviews past experimental and theoretical research and methods to estimate consequences. Heavily illustrated with photos, charts, tables, and diagrams, this manual is an essential tool for safety, insurance, regulatory, and engineering students and professionals. 

киберпанк

научная фантастика

Guidelines for Vapor Cloud Explosion, Pressure Vessel Burst, BLEVE and Flash Fire Hazards

This book helps advance process safety in a key area of interest. Currently, no literature exists which is solely dedicated to process safety for the bioprocessing industry. There are texts, guidelines, and standards on biosafety at the laboratory level and for industrial hygiene, but no guidelines for large-scale production facilities. In fact, biosafety is largely defined as a field that promotes safe laboratory practices, procedures and use of containment equipment and facilities. Additionally, biomedical engineers, biologists, or other professionals without chemical engineering training or knowledge of inherently safe design are designing many of these facilities. 

приключения

детективы

триллеры

историческая литература

книги о приключениях

серьезное чтение

об истории серьезно

Guidelines for Process Safety in Bioprocess Manufacturing Facilities

The first part of this book (Chapters 1 and 2) provides an introduction and discusses basic concepts. Chapter 3 deals with the use of the basic human senses for identifying hazards. Chapter 4 deals with different classes and categories of hazards. Chapter 5 deals with techniques and methodologies for identifying and evaluating hazards. Chapter 6 deals with making risk based decisions. Chapter 7 deals with follow-up and call to action. Chapter 8 deals with learning and continuous improvement. The Appendices provide references, case studies, hazard presentations and additional pictures. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

развлечения

A Practical Approach to Hazard Identification for Operations and Maintenance Workers

Siting of permanent and temporary buildings in process areas requires careful consideration of potential effects of explosions and fires arising from accidental release of flammable materials. This book, which updates the 1996 edition, provides a single-source reference that explains the American Petroleum Institute (API) permanent (752) and temporary (753) building recommended practices and details how to implement them. New coverage on toxicity and updated standards are also highlighted. Practical and easy-to-use, this reliable guide is a must-have for implementing safe building practices. 

короткие любовные романы

Guidelines for Evaluating Process Plant Buildings for External Explosions, Fires, and Toxic Releases

The 2nd edition provides an update of information since the publication of the first edition including best practices for managing process safety developed by industry as well as incorporate the additional process safety elements. In addition the book includes a focus on maintaining and improving a Process Safety Management (PSM) System. This 2nd edition also provides «how to information to» determine process safety performance status, implement one or more new elements into an existing PSM system, maintain or improve an existing PSM system, and manage future process safety performance.

Guidelines for Implementing Process Safety Management

This book is an update and expansion of topics covered in Guidelines for Mechanical Integrity Systems (2006). The new book is consistent with Risk-Based Process Safety and Life Cycle approaches and includes details on failure modes and mechanisms. Also, example testing an inspection programs is included for various types of equipment and systems. Guidance and examples are provided for selecting and maintaining critical safety systems. 

Guidelines for Asset Integrity Management

This book describes how to conduct a Combustible Dust Hazard Analysis (CDHA) for processes handling combustible solids. The book explains how to do a dust hazard analysis by using either an approach based on compliance with existing consensus standards, or by using a risk based approach. Worked examples in the book help the user understand how to do a combustible dust hazards analysis. 

руководства

спорт / фитнес

здоровье

Guidelines for Combustible Dust Hazard Analysis

манга / манхва / маньхуа

вебтун

Bow Ties in Risk Management. A Concept Book for Process Safety

юмористическая литература

современные детективы

юмор и сатира

Guidelines for Postrelease Mitigation Technology in the Chemical Process Industry

There is much industry guidance on implementing engineering projects and a similar amount of guidance on Process Safety Management (PSM). However, there is a gap in transferring the key deliverables from the engineering group to the operations group, where PSM is implemented. This book provides the engineering and process safety deliverables for each project phase along with the impacts to the project budget, timeline and the safety and operability of the delivered equipment. 

литературоведение

Guidelines for Integrating Process Safety into Engineering Projects

An essential guide for recognizing and responding to normalization of deviance to help organizations improve their process safety performance This book provides an introduction and offers approaches for finding and addressing normalization of deviation both in operational and organizational activities. It addresses the initial and long-term effects of normalization of deviations as seen in reduced efficiencies, reduced product quality, extended batch run time, and near miss process safety incidents which can lead to loss of containment of hazardous materials and energies. Recognizing and Responding to Normalization of Deviance addresses how to recognize and respond to the normalization of deviation that can, and almost certainly will, occur in any ongoing operations that involves humans. The book’s primary focus is on reducing the incidence of normalization of deviation and the associated increased risk exposure due to its effects when operating chemical or petrochemical manufacturing facilities. It contains an introduction to the concept and offers approaches for finding and addressing normalization of deviation when it presents itself in both operational and organizational activities. Contains guidance to assist facilities in recognizing and addressing the phenomenon of normalization of deviation Provides techniques for addressing normalized deviations and techniques to eliminate waste in all manufacturing processes Describes methods for identifying normalized deviation as well as where to find deviations Includes techniques to reduce operational normalization of deviance and to reduce organizational normalization of deviance Aimed at process safety professionals and consultants applying process safety risk reduction efforts in manufacturing areas, Recognizing and Responding to Normalization of Deviance is an important book for any organization that has seen its process safety performance deteriorate over time.

книги о путешествиях

другие справочники

Recognizing and Responding to Normalization of Deviance

An essential guide that offers an understanding of and the practices needed to assess and strengthen process safety culture Essential Practices for Developing, Strengthening and Implementing Process Safety Culture presents a much-needed guide for understanding an organization's working culture and contains information on why a good culture is essential for safe, cost-effective, and high-quality operations. The text defines process safety culture and offers information on a safety culture’s history, organizational impact and benefits, and the role that leadership plays at all levels of an organization. In addition, the book outlines the core principles needed to assess and strengthen process safety culture such as: maintain a sense of vulnerability; combat normalization of deviance; establish an imperative for safety; perform valid, timely, hazard and risk assessments; ensure open and frank communications; learn and advance the culture. This important guide also reviews leadership standards within the organizational structure, warning signs of cultural degradation and remedies, as well as the importance of using diverse methods over time to assess culture. This vital resource: Provides an overview for understanding an organization's working culture Offers guidance on why a good culture is essential for safe, cost-effective, and high quality operations Includes down-to-earth advice for recognizing, assessing, strengthening and sustaining a good process safety culture Contains illustrative examples and cases studies, and references to literature, codes, and standards Written for corporate, business and line managers, engineers, and process safety professionals interested in excellent performance for their organization, Essential Practices for Developing, Strengthening and Implementing Process Safety Culture is the go-to reference for implementing and keeping in place a culture of safety.

учебная литература

Essential Practices for Creating, Strengthening, and Sustaining Process Safety Culture

Process safety management (PSM) systems are only as effective as the day-to-day ability of the organization to rigorously execute system requirements correctly every time. The failure of just one person in completing a job task correctly just one time can unfortunately lead to serious injuries and potentially catastrophic incidents. In fact, the design, implementation, and daily execution of PSM systems are all dependent on workers at all levels in the organization doing their job tasks correctly every time. High levels of Operational Discipline, therefore, help ensure strong PSM performance and overall operational excellence. This book details management practices which help ensure rigor in executing process safety programs in order to prevent major accidents.

стихи и поэзия

сборник рассказов

cтихи, поэзия

Conduct of Operations and Operational Discipline. For Improving Process Safety in Industry

Whether occurring accidentally or through acts of terrorism, catastrophic chemical releases must be identified early in order to mitigate their consequences. Continuous sensor monitoring can detect catastrophic chemical releases early enough to curb extreme amounts of damage. In several notable instances, such monitors have not been used appropriately, or have fallen short of what they should have been capable of delivering. This book provides the technical background and guidance needed to get the most from this emerging technique and details the essentials of preparing any workplace from falling victim to a gas-leak catastrophe. 

книги для детей

Continuous Monitoring for Hazardous Material Releases

It is crucial for process safety professionals to be aware of best practices for post merger integration at any level. A compilation of industry best practices from both technical and financial perspectives, this book provides a single reference that addresses acquisitions and merger integration issues related to process safety. Presently, there are limited references on how to handle acquisitions in several different CCPS publications and almost no coverage of the post-merger integration issue, so this reference fills a notable gap in the coverage. 

Guidelines for Process Safety Acquisition Evaluation and Post Merger Integration

Familiarizes the student or an engineer new to process safety with the concept of process safety management Serves as a comprehensive reference for Process Safety topics for student chemical engineers and newly graduate engineers Acts as a reference material for either a stand-alone process safety course or as supplemental materials for existing curricula Includes the evaluation of SACHE courses for application of process safety principles throughout the standard Ch.E. curricula in addition to, or as an alternative to, adding a new specific process safety course Gives examples of process safety in design

Introduction to Process Safety for Undergraduates and Engineers

Providing in-depth guidance on how to design and rate emergency pressure relief systems, Guidelines for Pressure Relief and Effluent Handling Systems incorporates the current best designs from the Design Institute for Emergency Relief Systems as well as American Petroleum Institute (API) standards. Presenting a methodology that helps properly size all the components in a pressure relief system, the book includes a CD with the CCFlow suite of design tools and the new Superchems for DIERS Lite software, making this an essential resource for engineers designing chemical plants, refineries, and similar facilities. Access to Software Access the Guidelines for Pressure Relief and Effluent Handling Software and documents using a web browser at: http://www.aiche.org/ccps/PRTools Each folder will have a readme file and installation instructions for the program. After downloading SuperChems™ for DIERS Lite the purchaser of this book must contact the AIChE Customer Service with the numeric code supplied within the book. The purchaser will then be supplied with a license code to be able to install and run SuperChems™ for DIERS Lite. Only one license per purchaser will be issued.

историческая фантастика

боевая фантастика

попаданцы

Средневековье

альтернативная история

путешествия во времени

современные технологии в прошлом

военно-историческая фантастика

Guidelines for Pressure Relief and Effluent Handling Systems

This book provides guidance on characterizing, recognizing, and responding to warning signs to help avoid process incidents and injuries before they occur. The guidance can be used by both process safety management (PSM) professionals in evaluating their processes and PSM systems as well as for operators who are often the frontline defense against process incidents. Warning signs may consist of process deviations or upsets, instrumentation warnings or alarms, past operating history and incidents, observable problems such as corrosion or unusual odors, audit results indicating procedures are not being followed, or a number of other indicators. Filled with photos and practical tips, this book will turn anyone in a process plant into a hazard lookout and will help prevent potential incidents before they turn into catastrophic events. 

остросюжетные любовные романы

Recognizing Catastrophic Incident Warning Signs in the Process Industries

This Guideline presents the framework of process safety knowledge and expertise versus the desired competency level in a «super-matrix» format, vertically and diagonally. The matrix references for potential remedies/required training may be tailored to a company's internally developed training, reference externally available training, or some combination of the two. Chapters include: Identify Process Safety Roles & Competency Needs; Process Safety Competency Matrix; Individual and Corporate Process Safety Competencies; Conduct Assessments vs. Needs; Develop Gap Closure Plans; and Sustaining Competencies.

CCPS (Center for Chemical Proc